|
|
 |
505.V3 H4 - Twin pack on Headshells
Stanton
The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs Consumers Record shops Beginner DJs
More Information... |
|
 |
520.V3 H4 - Twin pack on Headshells
Stanton
Designed with the most demanding cueing in mind, the 520.V3 offers the tightest suspension in the 500 family of products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs
More Information... |
|
 |
680.V3 MP4 (Matched Pair)
Stanton
The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3's suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. Available in the following versions: SingleA single cartridge inside a plastic carry case. MP4The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". Perfect for: Hip-hop / Scratch DJs Club DJs
More Information... |
|
 |
Akai CDM25
Akai
Akai CDM25 Akai CDM25 Description: Akai CDM25 CDR for the MPC2500 Turn your MPC2500 into a complete studio workstation. With the Akai CDM25 you can take your project from start to finish and have a CD at the end of it all. A great way to produce Demos or move projects from one studio to another. Use it to back up important data like samples and projects. Get your music heard easily and affordably. Get your Akai CDM25 today!
More Information... |
|
 |
Akai E2 Headrush
Akai
Akai E2 Headrush Akai E2 Headrush Description: The Akai Professional E2 Headrush pedal brings delay, tape echo simulations and a looping recorder in one convenient pedal. User selectable delay options allow for maximum control of output signal. Real time feedback and gain adjustment as well as echo rate. HEADRUSH also simulates a 4-head analog tape echo machine with control over decay and spacing between virtual tape heads to create complex multiple delays and repeats. The signal from each virtual head appears on an individual output for multiple returns when used with an external mixing console. The LOOPING RECORDER mode allows you to record and overdub layer after layer of sound in real-time making the HEADRUSH an unbelievable live performance tool. Depending upon which mode is selected, the left footswitch controls the on/off and play/stop functions while the right footswitch sets the tap delay time or recording and overdub options. The LED display indicates which effect in use and blinks in time showing the delay time selected. The Akai Professional E2 Headrush pedal puts delay, tape echo simulations and a looping recorder in one convenient pedal. A versatile delay pedal for live use, in particular for guitar and bass players, or vocalists. Akai E2 Headrush Features: 16-bit Digital Delay - Delay time from 0.5ms to an astonishing 23.8 seconds maximum Real-time delay control - sets delay time by tapping footswitch twice Tape Echo mode with four individual outputs for each head Looping Recorder with overdub mode - Powerful tool for solo performances Selectable Fixed or Adjustable Loop Level. Akai E2 Headrush Specifications: Modes NORMAL DELAY, TAPE ECHO and LOOPING Resolution 16bit Sample rate Normal : 44.1kHz Extend: 29.4kHz Maximum time Delay: 23.8 seconds Tape Echo: 5.9 seconds Looping: 23.8 seconds, 11.9 seconds overdub [Normal] 35.6 seconds, 17.8 seconds overdub [Extended] Controls LEVEL, HF DAMP, FEEDBACK, TIME COARSE/TIME, TIME FINE/HEAD GAP, RATIO Switches MODE SELECT, LOOP LEVEL, LOOP TIME, Footswitch x 2 LEDs MODE x 3, EFFECT ON/OFF x1, TEMPO x1 Connections Input: 1/4" jack. Input impedance 500kOhms or more/td> Outputs: Mix, Effect/Head 1, Heads 2-4: 1/4" jack x 5, output impedance 1kOhms or lesss 9V DC in (160mA Options AC adaptor (MP9-III Dimensions (W x D x H) 5.51" x 7.22" x 2.56" (140mm x 183.5mm x 65mm) Weight 2.54lbs (1.15kg) Get your Akai E2 Headrush today!
More Information... |
|
 |
Akai HDM10
Akai
Akai HDM10 Akai HDM10 Description: Hard drive adaptor kit for MPC1000 (optional) Get your Akai HDM10 today!
More Information... |
|
 |
Akai IB-24ADT
Akai
Akai IB-24ADT Akai IB-24ADT Description: 16 Channel ADAT Optical I/O -DPS24 Add 8 channels of ADAT I/O to your Akai DPS24! The DPS24 can be integrated into any ADAT environment Or interfaced with any ADAT-compatible device with this convenient I/O card. Get your Akai IB-24ADT today!
More Information... |
|
 |
Akai IB-4D
Akai
Akai IB-4D Akai IB-4D Description: S/PDIF 2 Channel I/O - MPC4000 & Z4/8 Add S/PDIF I/O to your Z4 or MPC4000. They can interfacewith any S/PDIF-compatible device with this convenient I/O card. Card for 2-channel S/PDIF I/O for use with the Z4 sampler and MPC4000. Get your Akai IB-4D today!
More Information... |
|
 |
Akai MPD16
Akai
Akai MPD16 Akai MPD16 Description: The Akai Professional MPD16 USB/MIDI Pad unit is a dedicated pad controller that can be used with any sampler/sound module and/or sequencer to record and play drum and percussion patterns with the expression and feel that only pads can offer. Equipped with 16 totally assignable MPC pads switchable across two banks (thereby giving you effectively 32 pads) plus a performance slider for hi-hat and other sample switching, the MPD16 is the definitive laptop rhythm controller. The MPD16 has MIDI out so that it can be used with any sampler or sound module. However, the MPD16 is also equipped with USB. Not only can it derive its power supply from that interface when used with Akai Professional's USB equipped Z4 or Z8, it can also communicate with a computer for controlling software applications. Each pad can be set to output MIDI notes of your choosing with a variable velocity range and these can all be set conveniently via your Mac or PC. The MPD16 also inherits some of the MPC series' features such as the FULL LEVEL and 16 LEVELS functions available on dedicated switches Sixteen touch-sensitive MPC pads let you play grooves exactly as you feel them. The days of programming drums and percussions via a keyboard are over. The MPD16 is the perfect controller for computer based drum programming. Also a great trigger pad to control rack-mount samplers for live use. Akai MPD16 Features: 16 original MPC pads (velocity and pressure sensitive) 2 switchable banks MPC's 16-Levels and Full Level features Slider sending continuous controller data MIDI and/or USB operation Powered via USB cable (or optional AC adaptor) Free set-up utility software for Windows, Mac OS 9 and OS X Akai MPD16 Specifications: Pads 16 x 2 banks. Velocity sensitive MPC-style pads Keys Full Level: All pads to maximum output velocity (127) 16 Levels: Each pad offers progressive level for the last selected/used pad Bank: Selects the pad bank Active: Enables the slider Controls Assignable slide Connections MIDI out USB 9V DC (95mA) - not required when used with USB equipped Z4/8 Supplied accessories USB Driver and editor software on CD-ROM Get your Akai MPD16 today!
More Information... |
|
 |
Akai MPD24
Akai
Akai MPD24 Akai MPD24 Description: PAD CONTROL REDEFINED. 16 pad USB/MIDI controller with 6 faders and 8 assignable 360 knobs Akai Professional's MPD24 is the velocity sensitive pad controller for musicians and DJs. Modeled after the landmark MPC series, the MPD24 allows for an extremely expressive and intuitive solution to percussion and rhythm programming. With 16 MPC-style velocity and pressure sensitive pads, four selectable pad banks for a total of 64 playable pads six assignable faders and eight assignable, 360o knobs for transmitting MIDI Control Change data, the MPD24 provides unprecedented creative freedom for manipulating sampled material. The MPD24 also features transport controls for interfacing with DAW/sequencing applications. A fully reprogrammable controller, the MPD24 is a malleable and multi-functional tool that fits perfectly within any production or performance environment. Applications: Beat Creation MIDI sequencing Live Performance Akai MPD24 Features: 16 MPC-style velocity and pressure sensitive pads 4 selectable pad banks for a total of 64 pads 6 assignable Faders for transmitting MIDI Control Change data 8 assignable 360 degree knobs REW, FF, STOP PLAY and REC buttons that transmit MMC (MIDI Machine Control) messages to DAW/Sequencing applications Backlit, easy to read LCD display MIDI and/or USB operation USB powered (or powered via optional AC adaptor) Included Editor Librarian software (Mac and PC) MPC 16 Levels and Full Level feature Includes a customized version of Fxpansion's BFD Lite Get your Akai MPD24 today!
More Information... |
|
 |
Akai MPD32
Akai
Akai MPD32 Akai MPD32 Description: MIDI/USB SOFTWARE CONTROL SURFACE USB/Midi Software Control Surface with 16-MPC style pads, BPM note repeat AKAI'S FLAGSHIP PAD CONTROLLER WITH GENUINE MPC PADS. The MPD32 is Akai Professional's ultimate velocity-sensitive pad controller for musicians and DJs. Modeled after the industry-standard MPC series, the MPD32 delivers the most expressive software beat control available. Sixteen velocity and pressure-sensitive genuine MPC pads provide the industry's finest feel and expression. Four selectable pad banks for a total of 64 playable pads, eight assignable faders, eight assignable switches and eight assignable, 360 knobs for transmitting MIDI Control Change data, all combine for unprecedented creative freedom. Three selectable control banks extend the number of available faders, buttons and knobs to 24 each. Two assignable footswitch inputs and an expression pedal input takes the total assignable controller count to 75 - the most by far in any pad controller. The MPD32 also features transport controls for interfacing with DAW/sequencing applications. The MPD32 is a fully programmable controller and multi-functional control surface that fits perfectly within any production or performance environment. Akai MPD32 Features: MIDI synced note-repeat with MPC swing 16 full-sized, genuine MPC pads with velocity and pressure-sensitive response Assignable switches, sliders and endless knobs for a total of 72 controllers 2 assignable Foot Switches 1 assignable Foot Pedal controller Large, easy-to-read custom LCD display 30 user-definable Presets for various DAW and software applications MMC/MIDI Start/Stop transport buttons Get your Akai MPD32 today!
More Information... |
|
 |
AKG CS2DU
AKG
AKG CS2DU AKG CS2DU Description: The AKG CS2-DU Delegate Station is a microphone station for use with the AKG Conference System. The CS2-DU provides conference delegates with a microphone station and monitoring of the entire discussion. NOM (Number of Open Microphone) dip switches set the limit of simultaneously open-microphones. The AKG Conference Systems are completely modular and a selection of optional gooseneck lengths and microphone capsules are available to suite specific needs (microphone capsules and goosenecks are sold separately). The CS2-DU features two built-in speakers and two headphone outputs for flexible monitoring. Additional features include voice activation (on/off) switch, voice activation threshold and hold time settings, speaker/headphone level and more. AKG CS2DU Features: Flexible Monitoring The CS2-DU features two built-in speakers and two headphone outputs with level control. Enhanced Control Additional features include voice activation (on/off) switch, voice activation threshold and hold time settings, speaker/headphone level and more. Sleek Profile The CS2-DU features a flat, unobtrusive profile that's ideal for boardrooms, meeting halls, conference panels, etc. AKG CS2DU Specifications: Inputs Balanced, with DC Supply Voltage Outputs 2x male 15-pin D-Sub HD Multi-Pin I/O Connectors See Outputs Frequency Response 22Hz to 22kHz Signal-to-Noise Ratio 81dB Distortion 0.25% @ 1kHz Power Requirements 5.5 VDC Get your AKG CS2DU today!
More Information... |
|
 |
AKG CS2DUfix
AKG
AKG CS2DUfix AKG CS2DUfix Description: Installed delegate mic station - requires cable, gooseneck and capsule The AKG CS2-DU Fix Delegate Station is a microphone station for use with the AKG Conference System. The CS2-DU provides conference delegates with a microphone station and monitoring of the entire discussion. NOM (Number of Open Microphone) dip switches set the limit of simultaneously open-microphones. The AKG Conference Systems are completely modular and a selection of optional gooseneck lengths and microphone capsules are available to suite specific needs (microphone capsules and goosenecks are sold separately). The CS2-DU Fix features two built-in speakers and two headphone outputs for flexible monitoring. Additional features include voice activation (on/off) switch, voice activation threshold and hold time settings, speaker/headphone level and more. AKG CS2DUfix Features: Fixed Installation This version of the CS2-CU is designed for permanent installation in conference desks, podiums, etc. Flexible Monitoring The CS2-DU features two built-in speakers and two headphone outputs with level control. Enhanced Control Additional features include voice activation (on/off) switch, voice activation threshold and hold time settings, speaker/headphone level and more. Sleek Profile The CS2-DU features a flat, unobtrusive profile that's ideal for boardrooms, meeting halls, conference panels, etc. AKG CS2DUfix Specifications: Inputs Balanced, with DC Supply Voltage Outputs 2x male 15-pin D-Sub HD Multi-Pin I/O Connectors See Outputs Frequency Response 22Hz to 22kHz Signal-to-Noise Ratio 81dB Distortion 0.25% @ 1kHz Power Requirements 5.5 VDC Get your AKG CS2DUfix today!
More Information... |
|
 |
AKG D 5
AKG
AKG D 5 AKG D 5 Description: The D 5 dynamic vocal microphone for lead and backing vocals delivers a powerful sound even on the noisiest stage. Its supercardioid polar pattern ensures maximum gain before feedback (for more details, visit www.feedbackisdead.com). The D 5 stands for a crisp sound that cuts through every mix. AKG made the first microphone diaphragm ever whose thickness varies across its diameter. The new Laminated Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no extra tuning resonators, leading to a quantum leap in audio performance. The dual shock mount eliminates any kind of mechanical noise for trouble-free live use. The audience will hear nothing but the pristine sound of your voice! Available versions: D 5: for standard applications. D 5 S: with on/off switch. D 5 WL 1: D 5 microphone element with threaded connection for use with AKG wireless systems. AKG D 5 Features: Extremely rugged vocal/speech microphone Available with or without on/off switch Patented AKG Laminated Varimotion diaphragm Spring steel wire-mesh grill AKG D 5 Specifications: Polar pattern supercardioid Frequency range 70 Hz to 20 kHz Sensitivity 2.6 mV/Pa (-52 dBV) Max. SPL 147/156 dB SPL (for 1% / 3% THD) Equivalent noise level 18 dB-A Impedance Recommended load impedance >= 2000 ohms Connector 3-pin XLR Finish matte grayish blue Dimensions length: 185.2 mm (7.3 in.); diameter: 51 mm (2 in.) Net weight 340 g (12 oz.) Shipping weight 655 g (1.45 lbs.) Patent(s) Varimotion - multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651) Get your AKG D 5 today!
More Information... |
|
 |
AKG D11/XLR
AKG
AKG D11/XLR AKG D11/XLR Description: Rugged all metal microphone for bass instruments such as bass drum, trombone or bass amplifier. It delivers powerful sound with a high energy low end. Complete with a 5 m (16 ft.) XLR/XLR microphone cable. Cardioid polar pattern. AKG D11/XLR Features: Dynamic microphone designed for low-pitched instruments Powerful sound with gutsy bass range Handles highest sound pressure levels with ease Integrated stand adapter Rugged all-metal body withstands typical tough handling on stage AKG D11/XLR Specifications: Polar pattern cardioid Sensitivity 2.5 mV/Pa Impedance 600 ohms Finish Zinc/alloy diecast Net weight 470 g (1.03 lbs.) Shipping weight 1,400 g (3.08 lbs.) Get your AKG D11/XLR today!
More Information... |
|
 |
AKG D112
AKG
AKG D112 AKG D112 Description: Industry-standard cardioid large-diaphragm bass drum mic. The D 112 has earned a well-deserved reputation worldwide as the best kick drum microphone ever made. Heavy-footed drummers won't faze it, because the D 112 handles up to 160 dB SPL with no audible distortion. A specially engineered diaphragm with a very low resonance frequency maintains solid and powerful response below 100 Hz, while a narrow band presence rise at 4 kHz punches through dense mixes with little or no added EQ. The result is a kick drum sound that ideally balances precise definition and forceful impact. The D 112 is also an excellent choice for use with bass cabinets, trombones, etc. Built in windscreen, SA 60 stand adapter included. AKG D112 Features: Large-diaphragm dynamic microphone for bass instruments Extremely high SPL capability Classic microphone for stage and studio applications AKG D112 Specifications: Polar pattern cardioid Frequency range 20 to 17,000 Hz Sensitivity 1,8 mV/Pa (-75 dBV) Max. SPL outside measurement range Equivalent noise level 73 dB -A Impedance 210 ohms Recommended load impedance >=600 ohms Connector 3-pin XLR Finish dark gray metallic enamel Dimensions 150 x 70 x 115 mm / 5.9 x 2.8 x 4.5 in. Net weight 380 g / 13.4 oz. Shipping weight 990 g / 2.2 lbs. Get your AKG D112 today!
More Information... |
|
 |
AKG D22/XLR
AKG
AKG D22/XLR AKG D22/XLR Description: Low-cost instrument mic with 16 ft. cable and XLR connectors The D 22 microphone with its solid metal case will stand up to the hardships of on stage use. An integrated stand adapter and a bypacked mounting bracket for tom tom etc. make the highly versatile for use on drums, percussions, wind instruments and guitar amps. Complete with a 5 m (16 ft.) XLR/XLR microphone cable. Cardioid polar pattern. AKG D22/XLR Features: Dynamic microphone designed for drums and percussions, wind instruments and guitar amps Response tailored for neutral reproduction of instrument sounds Integrated stand adapter and external bracket for easy mounting on stands or drums Rugged all-metal body withstands typical tough handling on stage AKG D22/XLR Specifications: Polar pattern cardioid Sensitivity 2.5 mV/Pa Impedance 200 ohms Finish Zinc/alloy diecast Net weight 280 g (0.62 lbs.) Shipping weight 1,200 g (2.65 lbs.) Get your AKG D22/XLR today!
More Information... |
|
 |
AKG D230
AKG
AKG D230 AKG D230 Description: This rugged dynamic ENG microphone delivers exceptional sensitivity and clarity in the demanding news gathering field. The extended shaft allows for easy placement of station flags without typical handling problems. The body is made of extremely rugged die cast metal with a non-reflective surface for low-profile on-camera operation. Stand adapter included. AKG D230 Features: Omnidirectional reporter's microphone Rugged all-metal body Extended shaft for ease of handling Integrated windscreen AKG D230 Specifications: Polar pattern omnidirectional Frequency range 40 to 20,000 Hz Sensitivity 2.5 mV/Pa (-52 dBV) Impedance 320 ohms Recommended load impedance >1000 ohms Connector 3-pin XLR Finish dark gray Net weight 225 g / 7.9 oz. Shipping weight 840 g / 1.9 lbs. Patent(s) Varimotion - multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651) Get your AKG D230 today!
More Information... |
|
 |
AKG D3700M
AKG
AKG D3700M AKG D3700M Description: Dynamic cardioid vocal mic with TM40 module option The D 3700M provides revolutionary versatility for a new way of performing. The ergonomically optimized triangular shape of Tripower Series bodies is easy to grip and keeps the microphones from rolling away on an inclined surface. Available modules: XLR connector module with gold plated contacts, for use with a standard microphone cable. XLR/S connector module with on/off switch. The package includes the microphone, a stand adapter and a hard shell road case. D 3700 WL 1: D 3700 microphone element with threaded connection for use with AKG wireless systems. AKG D3700M Features: Dynamic vocal microphone Varimotion technology Spring steel wire mesh cap Ergonomic triangle shape Elastic dual-circuit suspension AKG D3700M Specifications: Polar pattern Cardioid Sensitivity 2,5 mV/Pa (-52 dBV re 1 V/Pa) Equivalent noise level 19 dB (A) to DIN 45412 Impedance Recommended load impedance >= 2.000 Ohms Connector 3-pin male XLR Finish Matte black enamel Net weight 290g (10.4 oz.) Shipping weight 970g (2.1 lb.) Patent(s) Varimotion - multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651) The microphone shall be a dynamic design with a hypercardioid polar pattern. It shall be optimized for lectern and vocal use. The microphone shall provide a plug-in XLR connector module or XLR/S connector module with on/of switch. The microphone shall meet the following specifications: frequency range: 50 Hz to 20.000 Hz; sensitivity at 1 kHz: 2.5 mV/Pa (-52 dBV); electrical impedance: 800 ohms; on/off switch; size: 50 mm in dia., 186 mm long. The microphone shall be finished in matte black ad have a net/shipping weight of 290/970 g (10.4 oz./2.1 lbs.). Get your AKG D3700M today!
More Information... |
|
 |
AKG D3700MWL/1 MK2
AKG
AKG D3700MWL/1 MK2 AKG D3700MWL/1 MK2 Description: D3700M dynamic microphone head for AKG wireless system The AKG D3700WL is the cardioid capsule found on the D3700. The capsule is designed for use with AKG handheld transmitters that accommodate interchangeable capsules. The cardioid polar pattern providing a greater pick up range than that of super-cardioid pattern, while reducing noise and unwanted signal at the off-axis sections of the capsule. The microphone yields a frequency response of 70 - 20,000Hz making it suitable for vocal and instrument capturing. The dynamic element features a max SPL response of 147dB allowing it to capture transient signals without peaking. AKG D3700MWL/1 MK2 Features: Modular Design The D3700WL1 is the modular capsule of the D3700M. The capsule is designed for use with AKG handheld transmitters that support modular screw mount capsules. Wide Frequency and SPL Response The D3700M boast a frequency response of 70 - 20,000Hz and max SPL rating of 147dB for smooth, distortion free sound reproduction in any application. On / Off Switch This version features an On/Off switch on the modular output stage for added control. AKG D3700MWL/1 MK2 Specifications: Transducer Dynamic Polar Pattern Cardioid Frequency Response 70 - 20,000Hz Maximum Input Sound Level 147dB / 156dB SPL for 1% / 3% THD Power Requirements dynamic element - no power required Output Impedance Electrical: Recommended Load: > / -2.000 ohms Output Connectors Threaded screw type connection Dimensions Length x Diameter 7.3 x 2.0" (186 x 50mm) Weight 10.4 oz (290 g) Get your AKG D3700MWL/1 MK2 today!
More Information... |
|
|
